NALONE - FIFI CLITORAL VIBRATOR

Discover a new concept. Did you think you had seen it all? Nalone hides more than meets the eye: at first glance, a normal vibrator containing state-of-the-art technology at the service of pleasure.

Meet Fifi, an external clitoral stimulator that makes this toy a perfect ally for your pleasure. It is ergonomically designed for maximum clitoral contact and transmits powerful oscillating vibrations to your body.

The silicone it is made of is safe and guarantees perfect stimulation.

Specifications;

• Material: Silicone and ABS
• Vibration modes: 7 sound vibration modes
• Maximum noise level: less than 50 dB
• Dimensions: 92 mm (L) x 51 mm (D)
• Charging: Lithium battery (USB charging cable included)
• 100% waterproof

① Vibrating tip② Accessory connection cable③ Vibrating tip④ Vibrating tip⑤ Accessory On/Off/Advanced vibration mode ⑦ Accessory connector⑥ Fi Fi On/Off/Advanced vibration mode⑧ Charging port

Stimulation modes

• 1. Slow vibration
• 2. Medium vibration
• 3. Fast vibration
• 4. Medium pulse vibration
• 5. Fast pulse vibration
• 6. 2 short vibrations and one long
• 7. Graduated pulse vibration

How to use

• 1. To charge your vibrator, connect the charger's USB cable to a USB adapter (5V/1A adapter recommended). Connect the other part of the USB cable to the base of the vibrator (at the bottom of the vibrator). While charging, a blue light will flash on the control panel to indicate that charging is in progress. After charging, the light will stop flashing to indicate that it is ready for use. Please note that when using for the first time or if you have not used it for a long time, the light may not turn on for a few minutes.
• 2. To turn on the vibrator, press and hold the button for 3 seconds.
• 3. If you quickly press the button , the vibrator will enter manual mode. Each time you press the button It will change the vibration mode and go through all of them.
• 4. To turn off the vibrator, press and hold the " " button for 3 seconds
• 5. To use the FiFi 2 accessory, connect the accessory to the FIFI 2 base (specification - point 6). If you quickly press the " " button, the vibrator will enter manual mode. Each time you press the " " button, it will activate Change the vibration mode and go through all of them
• 7. To turn off the vibrator, press and hold the button for 3 seconds

Warnings

1. ◆ Make sure the vibrator is fully charged before use.
2. ◆ Clean/disinfect your vibrator with warm water and antibacterial soap.
3. ◆ Use only water-soluble lubricants. Never use massage oils, hand creams, or other lubricants
4. .◆ After use, it is recommended to clean the vibrator to avoid bacterial growth.